Chemical Formula Fe, <0.02% C, 19-23% Cr, 23-28% Ni, 4-5% Mo, <2.0% Mn, <1.0% Si, <0.045% P, <0.035% S, 1.0-2.0% Cu Introduction Grade 904L stainless steel is a non-stabilized austenitic...
Ball valve attached codes: V represents valve spool with a “V”shape structure, D represents low temperature, B represents heat preservation, P represents exocentric construction, U&S&DY...
BUTTERFLY VALVES A Butterfly valve is a quarter-turn rotational motion valve, that is used to stop, regulate, and start flow. Butterfly valves are easy and fast to open. A 90° rotation of the...
PRESSURE SEAL VALVES Pressure seal construction is adopted for Valves for high pressure service, typically in excess of above 170 bar. The unique feature about the pressure seal Bonnet is that the body-Bonnet...
Nowadays, most valves have poor sealing performance. Many buyers even sellers do not know how to solve the problem. Through particular research and overall discuss, we have found five ways to...
Fluorocarbon Coating (PTFE, Xylan, Teflon, Emralon ) Fluorocarbon Coating is an organic coating consisting of solid lubricant dispersed in an organic binder and dissolved in a specially formulated...
CHECK VALVES Check valves are "automatic" valves that open with forward flow and close with reverse flow. The pressure of the fluid passing through a system opens the valve, while any reversal...
BELLOW(S) SEAL(ED) VALVES Leakage at various points in pipelines found in chemical plants creates emissions. All such leakage points can be detected using various methods and instruments and should be...
PLUG VALVES A Plug Valve is a quarter-turn rotational motion Valve that use a tapered or cylindrical plug to stop or start flow. In the open position, the plug-passage is in one line with the inlet...
Valve Trim Material, Temperature Limits (Degrees Fahrenheit) Material Lower/℃ Lower/°F Upper/℃ Upper/°F Type 304 Stainless Steel -268 -450 316 600...
GLOBE VALVES A Globe valves is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely...
GATE VALVES Gate valves are mainly designed to start or stop flow, when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either...